| Steel > 0.25% C | Steel < 0.25% C | Stainless steel |
|---|---|---|
| 0,5 - 7 mm 0.020 - 0.276 " | 0,5 - 7 mm 0.020 - 0.276 " | 0,5 - 6 mm 0.020 - 0.236 " |
| Copper | Brass | Aluminium |
| 0,5 - 4 mm 0.020 - 0.157 " | 0,6 - 6 mm 0.024 - 0.236 " | 0,9 - 6 mm 0.035 - 0.236 " |
| Nickel | ||
| 0,8 - 7 mm 0.031 - 0.276 " |
| steel rope |
|---|
| 1 - 5 mm 0.039 - 0.197 " |
| steel rope |
|---|
| 1 - 6 mm 0.039 - 0.236 " |
| Annealing length | Weight | Nominal capacity in kVA | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
| ||||||||||
| Special features | ||||||||||||
| ||||||||||||
 | Wire cutter left, angled For steel Ø 0.4-2.5 mm – 600 N/mm² For steel Ø 0.4-2.0 mm – 1000 N/mm² For steel Ø 0.4-1.5 mm – 1900 N/mm² |
 | Cutter for wires up to dia. Ø 4.0 mm with max. 500 N/mm² (punched disk with bores dias. Ø 1.4 mm - 4.5 mm, 8 bores) |
 | Lever shears D13 For steel up to Ø 12 mm for St 37, up to Ø 7 mm for hard steel and up to Ø 12 mm for non-ferrous metal |
 | Hand shears C12 For steel up to Ø 8 mm – 800 N/mm² Up to Ø 5 mm over 800 N/mm² For non-ferrous metals up to Ø 11 mm |
 | Hole-cutting shears with slot (0900-0021)For steel of Ø 5-7 mm, depending on the strength of the wire For non-ferrous metals up to Ø 7 mm |
 | Hole-cutting shears with slot (0900-0020) For steel, Ø 5-8 mm, depending on wire strength for non-ferrous metals, up to Ø 8 mm |
 | Vertical grinding motor 0.25 kW For steel Ø 0.8 – 7.0 mm For non-ferrous metals Ø 0.8 – 6 mm |
 | Running gear with 4 wheels Incl. safety bow |
 | Workbench running gear |
 | Workbench running gear With lever shears D13 |
 | Workbench running gear With built-in automatic annealing device |
 | Power Pack (Battery pack – including workbench running gear) Voltage range 175-260V, 40-70Hz. |
 | Machine lamp (Only 50Hz) |
 | Electronic controller V30 |
