| Steel > 0.25% C | Steel < 0.25% C | Construction Steel | Stainless steel |
|---|---|---|---|
| 1,5 - 9 mm 0.059 - 0.354 " | 1,5 - 9 mm 0.059 - 0.354 " | 1,5 - 9 mm 0.059 - 0.354 " | 1,0 - 8 mm 0.039 - 0.315 " |
| Copper | Brass | Aluminium | |
| 1,5 - 5 mm 0.059 - 0.197 " | 1,5 - 8 mm 0.059 - 0.315 " | 2,5 - 8 mm 0.098 - 0.315 " | |
| Nickel | |||
| 1,5 - 9 mm 0.059 - 0.354 " |
| steel rope |
|---|
| 2 - 6 mm 0.079 - 0.236 " |
| steel rope |
|---|
| 1,5 - 8 mm 0.059 - 0.315 " |
| Annealing length | Weight | Nominal capacity in kVA | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
| ||||||||||
| Special features | ||||||||||||
| ||||||||||||
 | Lever shears D13 For steel up to Ø 12 mm for St 37, up to Ø 7 mm for hard steel and up to Ø 12 mm for non-ferrous metal |
 | Hand shears C12 For steel up to Ø 8 mm – 800 N/mm² Up to Ø 5 mm over 800 N/mm² For non-ferrous metals up to Ø 11 mm |
 | Angle grinder with vice For steel |
 | Hole-cutting shears with slot (0900-0021)For steel of Ø 5-7 mm, depending on the strength of the wire For non-ferrous metals up to Ø 7 mm |
 | Hole-cutting shears with slot (0900-0020) For steel, Ø 5-8 mm, depending on wire strength for non-ferrous metals, up to Ø 8 mm |
 | Vertical grinding motor 0.75 kW For steel Ø 1.5 – 16.0 mm For non-ferrous metals Ø 1.5 – 14.0 mm |
 | Vertical grinding motor 0.25 kW For steel Ø 0.8 – 7.0 mm For non-ferrous metals Ø 0.8 – 6 mm |
 | One-hand angle grinder - 0530-0159-01 |
 | Workbench running gear |
 | Workbench running gear With lever shears D13 |
 | Workbench running gear With built-in automatic annealing device |
 | Workbench running gear With vertical grinding motor 0.75 kW |
 | Running gear with 4 wheels |
 | Power Pack (Battery pack – including workbench running gear) Voltage range 175-260V, 40-70Hz. |
 | Machine lamp (Only 50Hz) |
 | Electronic controller V30 |
